Menu

Reverse narrow face flange

Reverse narrow face flange g 1 e g 0 h B D i C A W H T h T h D H D h G G H G
Reverse narrow face flange

Values for calculation

$ \{T\in\mathbb{R}\mid T\geq0\} $
This set includes all real numbers that are greater than or equal to zero. Therefore, it contains all positive numbers and zero, but no negative numbers.
$ T $ $ \mathrm{°C} $
$ \{T_{test}\in\mathbb{R}\mid T_{test}\geq0\} $
This set includes all real numbers that are greater than or equal to zero. Therefore, it contains all positive numbers and zero, but no negative numbers.
$ T_{test} $ $ \mathrm{°C} $
$ \{T_{assembly}\in\mathbb{R}\mid T_{assembly}\geq0\} $
This set includes all real numbers that are greater than or equal to zero. Therefore, it contains all positive numbers and zero, but no negative numbers.
$ T_{assembly} $ $ \mathrm{°C} $
$ \{P\in\mathbb{R}\mid P>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ P $ $ \mathrm{MPa} $
$ \{P_{test}\in\mathbb{R}\mid P_{test}>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ P_{test} $ $ \mathrm{MPa} $
$ R_{p0.2/T} $ $ \mathrm{MPa} $
$ R_{p0.2/T_{test}} $ $ \mathrm{MPa} $
$ R_{p1.0/T} $ $ \mathrm{MPa} $
$ R_{p1.0/T_{test}} $ $ \mathrm{MPa} $
$ R_{m/20} $ $ \mathrm{MPa} $
$ R_{m/T} $ $ \mathrm{MPa} $
$ R_{m/T_{test}} $ $ \mathrm{MPa} $
$ R_{p0.2/bolt/T} $ $ \mathrm{MPa} $
$ R_{p0.2/bolt/T_{test}} $ $ \mathrm{MPa} $
$ R_{p0.2/bolt/T_{assembly}} $ $ \mathrm{MPa} $
$ R_{m/20/bolt} $ $ \mathrm{MPa} $
$ R_{m/bolt/T} $ $ \mathrm{MPa} $
$ R_{m/bolt/T_{test}} $ $ \mathrm{MPa} $
$ R_{m/bolt/T_{assembly}} $ $ \mathrm{MPa} $
$ \{A\in\mathbb{R}\mid A>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ A $ $ \mathrm{mm} $
$ \{C\in\mathbb{R}\mid C>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ C $ $ \mathrm{mm} $
$ \{B\in\mathbb{R}\mid B>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ B $ $ \mathrm{mm} $
$ \{D_i\in\mathbb{R}\mid D_i>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ D_i $ $ \mathrm{mm} $
$ \{G\in\mathbb{R}\mid G>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ G $ $ \mathrm{mm} $
$ \{e\in\mathbb{R}\mid e>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ e $ $ \mathrm{mm} $
$ \{d_b\in\mathbb{R}\mid d_b>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ d_b $ $ \mathrm{mm} $
$ \{n\in\mathbb{R}\mid n>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ n $
$ \{g_0\in\mathbb{R}\mid g_0>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ g_0 $ $ \mathrm{mm} $
$ \{g_1\in\mathbb{R}\mid g_1>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ g_1 $ $ \mathrm{mm} $
$ \{h\in\mathbb{R}\mid h>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ h $ $ \mathrm{mm} $
$ \{b\in\mathbb{R}\mid b>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ b $ $ \mathrm{mm} $
$ \{m\in\mathbb{R}\mid m\geq0\} $
This set includes all real numbers that are greater than or equal to zero. Therefore, it contains all positive numbers and zero, but no negative numbers.
$ m $
$ \{y\in\mathbb{R}\mid y\geq0\} $
This set includes all real numbers that are greater than or equal to zero. Therefore, it contains all positive numbers and zero, but no negative numbers.
$ y $ $ \mathrm{MPa} $
$ \{ν\in\mathbb{R}\mid ν>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ ν $
$ \{A_B\in\mathbb{R}\mid A_B>0\} $
This set includes all real numbers that are greater than zero. Therefore, it contains only positive numbers. Zero and negative numbers are not included in this set.
$ A_B $ $ \mathrm{mm^2} $

Calculation

Maximum allowed value of the nominal design stress for normal operating load cases

$\text{if }\ \text{type }$$\text{of }$$\text{material}= \text{Cast steels}$
$\text{if }\ \text{type }$$\text{of }$$\text{material}= \text{Cast steels}$
Equations in LaTeX code
\text{if }\ \text{type }$$\text{of }$$\text{material}= \text{Cast steels}
$$f_d=\min\left(\cfrac{R_{p0.2/T}}{1.9}, \cfrac{R_{m/20}}{3}\right)$$
$f_d=\min\left(\cfrac{R_{p0.2/T}}{1.9}, \cfrac{R_{m/20}}{3}\right)$
Equations in LaTeX code
f_d=\min\left(\cfrac{R_{p0.2/T}}{1.9}, \cfrac{R_{m/20}}{3}\right)
$\text{else if }\ \text{type }$$\text{of }$$\text{material}= \text{Austenitic steels}\wedge\text{min. }$$\text{elongation }$$\text{after }$$\text{fracture}\geq 35$
$\text{else if }\ \text{type }$$\text{of }$$\text{material}= \text{Austenitic steels}\wedge\text{min. }$$\text{elongation }$$\text{after }$$\text{fracture}\geq 35$
Equations in LaTeX code
\text{else if }\ \text{type }$$\text{of }$$\text{material}= \text{Austenitic steels}\wedge\text{min. }$$\text{elongation }$$\text{after }$$\text{fracture}\geq 35
$$f_d=\max\left[\cfrac{R_{p1.0/T}}{1.5}, \min\left(\cfrac{R_{p1.0/T}}{1.2}, \cfrac{R_{m/T}}{3}\right)\right]$$
$f_d=\max\left[\cfrac{R_{p1.0/T}}{1.5}, \min\left(\cfrac{R_{p1.0/T}}{1.2}, \cfrac{R_{m/T}}{3}\right)\right]$
Equations in LaTeX code
f_d=\max\left[\cfrac{R_{p1.0/T}}{1.5}, \min\left(\cfrac{R_{p1.0/T}}{1.2}, \cfrac{R_{m/T}}{3}\right)\right]
$\text{else if }\ \text{type }$$\text{of }$$\text{material}= \text{Austenitic steels}\wedge 30\le \text{min. }$$\text{elongation }$$\text{after }$$\text{fracture}< 35$
$\text{else if }\ \text{type }$$\text{of }$$\text{material}= \text{Austenitic steels}\wedge 30\le \text{min. }$$\text{elongation }$$\text{after }$$\text{fracture}< 35$
Equations in LaTeX code
\text{else if }\ \text{type }$$\text{of }$$\text{material}= \text{Austenitic steels}\wedge 30\le \text{min. }$$\text{elongation }$$\text{after }$$\text{fracture}< 35
$$f_d=\cfrac{R_{p1.0/T}}{1.5}$$
$f_d=\cfrac{R_{p1.0/T}}{1.5}$
Equations in LaTeX code
f_d=\cfrac{R_{p1.0/T}}{1.5}
$\text{else}$
$\text{else}$
Equations in LaTeX code
\text{else}
$$f_d=\min\left(\cfrac{R_{p0.2/T}}{1.5}, \cfrac{R_{m/20}}{2.4}\right)$$
$f_d=\min\left(\cfrac{R_{p0.2/T}}{1.5}, \cfrac{R_{m/20}}{2.4}\right)$
Equations in LaTeX code
f_d=\min\left(\cfrac{R_{p0.2/T}}{1.5}, \cfrac{R_{m/20}}{2.4}\right)

Maximum allowed value of the nominal design stress for testing load cases

$\text{if }\ \text{type }$$\text{of }$$\text{material}= \text{Cast steels}$
$\text{if }\ \text{type }$$\text{of }$$\text{material}= \text{Cast steels}$
Equations in LaTeX code
\text{if }\ \text{type }$$\text{of }$$\text{material}= \text{Cast steels}
$$f_{test}=\cfrac{R_{p0.2/T_{test}}}{1.33}$$
$f_{test}=\cfrac{R_{p0.2/T_{test}}}{1.33}$
Equations in LaTeX code
f_{test}=\cfrac{R_{p0.2/T_{test}}}{1.33}
$\text{else if }\ \text{type }$$\text{of }$$\text{material}= \text{Austenitic steels}\wedge\text{min. }$$\text{elongation }$$\text{after }$$\text{fracture}\geq 35$
$\text{else if }\ \text{type }$$\text{of }$$\text{material}= \text{Austenitic steels}\wedge\text{min. }$$\text{elongation }$$\text{after }$$\text{fracture}\geq 35$
Equations in LaTeX code
\text{else if }\ \text{type }$$\text{of }$$\text{material}= \text{Austenitic steels}\wedge\text{min. }$$\text{elongation }$$\text{after }$$\text{fracture}\geq 35
$$f_{test}=\max\left(\cfrac{R_{p1.0/T_{test}}}{1.05}, \cfrac{R_{m/T_{test}}}{2}\right)$$
$f_{test}=\max\left(\cfrac{R_{p1.0/T_{test}}}{1.05}, \cfrac{R_{m/T_{test}}}{2}\right)$
Equations in LaTeX code
f_{test}=\max\left(\cfrac{R_{p1.0/T_{test}}}{1.05}, \cfrac{R_{m/T_{test}}}{2}\right)
$\text{else if }\ \text{type }$$\text{of }$$\text{material}= \text{Austenitic steels}\wedge 30\le \text{min. }$$\text{elongation }$$\text{after }$$\text{fracture}< 35$
$\text{else if }\ \text{type }$$\text{of }$$\text{material}= \text{Austenitic steels}\wedge 30\le \text{min. }$$\text{elongation }$$\text{after }$$\text{fracture}< 35$
Equations in LaTeX code
\text{else if }\ \text{type }$$\text{of }$$\text{material}= \text{Austenitic steels}\wedge 30\le \text{min. }$$\text{elongation }$$\text{after }$$\text{fracture}< 35
$$f_{test}=\cfrac{R_{p1.0/T_{test}}}{1.05}$$
$f_{test}=\cfrac{R_{p1.0/T_{test}}}{1.05}$
Equations in LaTeX code
f_{test}=\cfrac{R_{p1.0/T_{test}}}{1.05}
$\text{else}$
$\text{else}$
Equations in LaTeX code
\text{else}
$$f_{test}=\cfrac{R_{p0.2/T_{test}}}{1.05}$$
$f_{test}=\cfrac{R_{p0.2/T_{test}}}{1.05}$
Equations in LaTeX code
f_{test}=\cfrac{R_{p0.2/T_{test}}}{1.05}

Bolt nominal design stress for normal operating load cases

$\text{if }\ \text{type }$$\text{of }$$\text{material }$$\text{of }$$\text{bolt}= \text{Austenitic steels}$
$\text{if }\ \text{type }$$\text{of }$$\text{material }$$\text{of }$$\text{bolt}= \text{Austenitic steels}$
Equations in LaTeX code
\text{if }\ \text{type }$$\text{of }$$\text{material }$$\text{of }$$\text{bolt}= \text{Austenitic steels}
$$f_B=\cfrac{R_{m/bolt/T}}{4}$$
$f_B=\cfrac{R_{m/bolt/T}}{4}$
Equations in LaTeX code
f_B=\cfrac{R_{m/bolt/T}}{4}
$\text{else}$
$\text{else}$
Equations in LaTeX code
\text{else}
$$f_B=\min\left(\cfrac{R_{p0.2/bolt/T}}{3}, \cfrac{R_{m/20/bolt}}{4}\right)$$
$f_B=\min\left(\cfrac{R_{p0.2/bolt/T}}{3}, \cfrac{R_{m/20/bolt}}{4}\right)$
Equations in LaTeX code
f_B=\min\left(\cfrac{R_{p0.2/bolt/T}}{3}, \cfrac{R_{m/20/bolt}}{4}\right)

Bolt nominal design stress for testing load cases

$\text{if }\ \text{type }$$\text{of }$$\text{material }$$\text{of }$$\text{bolt}= \text{Austenitic steels}$
$\text{if }\ \text{type }$$\text{of }$$\text{material }$$\text{of }$$\text{bolt}= \text{Austenitic steels}$
Equations in LaTeX code
\text{if }\ \text{type }$$\text{of }$$\text{material }$$\text{of }$$\text{bolt}= \text{Austenitic steels}
$$f_{B_{test}}=\cfrac{R_{m/bolt/T_{test}}}{4}\cdot 1.5$$
$f_{B_{test}}=\cfrac{R_{m/bolt/T_{test}}}{4}\cdot 1.5$
Equations in LaTeX code
f_{B_{test}}=\cfrac{R_{m/bolt/T_{test}}}{4}\cdot 1.5
$\text{else}$
$\text{else}$
Equations in LaTeX code
\text{else}
$$f_{B_{test}}=\min\left(\cfrac{R_{p0.2/bolt/T_{test}}}{3}, \cfrac{R_{m/20/bolt}}{4}\right)\cdot 1.5$$
$f_{B_{test}}=\min\left(\cfrac{R_{p0.2/bolt/T_{test}}}{3}, \cfrac{R_{m/20/bolt}}{4}\right)\cdot 1.5$
Equations in LaTeX code
f_{B_{test}}=\min\left(\cfrac{R_{p0.2/bolt/T_{test}}}{3}, \cfrac{R_{m/20/bolt}}{4}\right)\cdot 1.5

Bolt nominal design stress at assembly temperature

$\text{if }\ \text{type }$$\text{of }$$\text{material }$$\text{of }$$\text{bolt}= \text{Austenitic steels}$
$\text{if }\ \text{type }$$\text{of }$$\text{material }$$\text{of }$$\text{bolt}= \text{Austenitic steels}$
Equations in LaTeX code
\text{if }\ \text{type }$$\text{of }$$\text{material }$$\text{of }$$\text{bolt}= \text{Austenitic steels}
$$f_{B,A}=\cfrac{R_{m/bolt/T_{assembly}}}{4}$$
$f_{B,A}=\cfrac{R_{m/bolt/T_{assembly}}}{4}$
Equations in LaTeX code
f_{B,A}=\cfrac{R_{m/bolt/T_{assembly}}}{4}
$\text{else}$
$\text{else}$
Equations in LaTeX code
\text{else}
$$f_{B,A}=\min\left(\cfrac{R_{p0.2/bolt/T_{assembly}}}{3}, \cfrac{R_{m/20/bolt}}{4}\right)$$
$f_{B,A}=\min\left(\cfrac{R_{p0.2/bolt/T_{assembly}}}{3}, \cfrac{R_{m/20/bolt}}{4}\right)$
Equations in LaTeX code
f_{B,A}=\min\left(\cfrac{R_{p0.2/bolt/T_{assembly}}}{3}, \cfrac{R_{m/20/bolt}}{4}\right)

Total hydrostatic end force

$$H=\cfrac{π}{4}\cdot\left(G^2\cdot P\right)$$
$H=\cfrac{π}{4}\cdot\left(G^2\cdot P\right)$
Equations in LaTeX code
H=\cfrac{π}{4}\cdot\left(G^2\cdot P\right)

Total hydrostatic end force for testing load cases

$$H_{test}=\cfrac{π}{4}\cdot\left(G^2\cdot P_{test}\right)$$
$H_{test}=\cfrac{π}{4}\cdot\left(G^2\cdot P_{test}\right)$
Equations in LaTeX code
H_{test}=\cfrac{π}{4}\cdot\left(G^2\cdot P_{test}\right)

Compression load on gasket to ensure tight joint

$$H_G=2\cdot π\cdot G\cdot b\cdot m\cdot P$$
$H_G=2\cdot π\cdot G\cdot b\cdot m\cdot P$
Equations in LaTeX code
H_G=2\cdot π\cdot G\cdot b\cdot m\cdot P

Compression load on gasket to ensure tight joint for testing load cases

$$H_{G_{test}}=2\cdot π\cdot G\cdot b\cdot m\cdot P_{test}$$
$H_{G_{test}}=2\cdot π\cdot G\cdot b\cdot m\cdot P_{test}$
Equations in LaTeX code
H_{G_{test}}=2\cdot π\cdot G\cdot b\cdot m\cdot P_{test}

Hydrostatic end force applied via shell to flange

$$H_D=\cfrac{π}{4}\cdot\left(D_i^2\cdot P\right)$$
$H_D=\cfrac{π}{4}\cdot\left(D_i^2\cdot P\right)$
Equations in LaTeX code
H_D=\cfrac{π}{4}\cdot\left(D_i^2\cdot P\right)

Hydrostatic end force applied via shell to flange for testing load cases

$$H_{D_{test}}=\cfrac{π}{4}\cdot\left(D_i^2\cdot P_{test}\right)$$
$H_{D_{test}}=\cfrac{π}{4}\cdot\left(D_i^2\cdot P_{test}\right)$
Equations in LaTeX code
H_{D_{test}}=\cfrac{π}{4}\cdot\left(D_i^2\cdot P_{test}\right)

Net pressure load on the flange faces

$$H_T=H_D-H$$
$H_T=H_D-H$
Equations in LaTeX code
H_T=H_D-H

Net pressure load on the flange faces for testing load cases

$$H_{T_{test}}=H_{D_{test}}-H_{test}$$
$H_{T_{test}}=H_{D_{test}}-H_{test}$
Equations in LaTeX code
H_{T_{test}}=H_{D_{test}}-H_{test}

Radial distance from bolt circle to circle on which $ H_D $ acts

$$h_D=\left(B-C-g_1\right)/2$$
$h_D=\left(B-C-g_1\right)/2$
Equations in LaTeX code
h_D=\left(B-C-g_1\right)/2

Radial distance from gasket load reaction to bolt circle

$$h_G=\left(C-G\right)/2$$
$h_G=\left(C-G\right)/2$
Equations in LaTeX code
h_G=\left(C-G\right)/2

Radial distance from bolt circle to circle on which $ H_T $ acts

$$h_T=\left(2\cdot C-G-D_i\right)/4$$
$h_T=\left(2\cdot C-G-D_i\right)/4$
Equations in LaTeX code
h_T=\left(2\cdot C-G-D_i\right)/4

Minimum required bolt load for assembly condition

$$W_A=π\cdot b\cdot G\cdot y$$
$W_A=π\cdot b\cdot G\cdot y$
Equations in LaTeX code
W_A=π\cdot b\cdot G\cdot y

Minimum required bolt load for operating condition

$$W_{op}=H+H_G$$
$W_{op}=H+H_G$
Equations in LaTeX code
W_{op}=H+H_G

Minimum required bolt load for testing load cases

$$W_{test}=H_{test}+H_{G_{test}}$$
$W_{test}=H_{test}+H_{G_{test}}$
Equations in LaTeX code
W_{test}=H_{test}+H_{G_{test}}

Total required cross-sectional area of bolts

$$A_{B,min}=\max\left(\cfrac{W_A}{f_{B,A}}, \cfrac{W_{op}}{f_B}, \cfrac{W_{test}}{f_{B_{test}}}\right)$$
$A_{B,min}=\max\left(\cfrac{W_A}{f_{B,A}}, \cfrac{W_{op}}{f_B}, \cfrac{W_{test}}{f_{B_{test}}}\right)$
Equations in LaTeX code
A_{B,min}=\max\left(\cfrac{W_A}{f_{B,A}}, \cfrac{W_{op}}{f_B}, \cfrac{W_{test}}{f_{B_{test}}}\right)
$$A_B\geq A_{B,min}$$
$A_B\geq A_{B,min}$
Equations in LaTeX code
A_B\geq A_{B,min}

Design bolt load for assembly condition

$$W=0.5\cdot\left(A_{B,min}+A_B\right)\cdot f_{B,A}$$
$W=0.5\cdot\left(A_{B,min}+A_B\right)\cdot f_{B,A}$
Equations in LaTeX code
W=0.5\cdot\left(A_{B,min}+A_B\right)\cdot f_{B,A}

Total moment acting upon flange for assembly condition

$$M_{T-A}=W\cdot h_G$$
$M_{T-A}=W\cdot h_G$
Equations in LaTeX code
M_{T-A}=W\cdot h_G

Total moment acting upon flange for operating condition

$$M_{T-op}=H_D\cdot h_D+H_T\cdot h_T$$
$M_{T-op}=H_D\cdot h_D+H_T\cdot h_T$
Equations in LaTeX code
M_{T-op}=H_D\cdot h_D+H_T\cdot h_T

Total moment acting upon flange for testing load cases

$$M_{T-test}=H_{D_{test}}\cdot h_D+H_{T_{test}}\cdot h_T$$
$M_{T-test}=H_{D_{test}}\cdot h_D+H_{T_{test}}\cdot h_T$
Equations in LaTeX code
M_{T-test}=H_{D_{test}}\cdot h_D+H_{T_{test}}\cdot h_T

Distance between centre lines of adjacent bolts

$$δ_b=C\cdot\sin{\cfrac{π}{n}}$$
$δ_b=C\cdot\sin{\cfrac{π}{n}}$
Equations in LaTeX code
δ_b=C\cdot\sin{\cfrac{π}{n}}

Bolt pitch correction factor

$$C_F=\max\left(\sqrt{\cfrac{δ_b}{2\cdot d_b+\cfrac{6\cdot e}{m+0.5}}}, 1\right)$$
$C_F=\max\left(\sqrt{\cfrac{δ_b}{2\cdot d_b+\cfrac{6\cdot e}{m+0.5}}}, 1\right)$
Equations in LaTeX code
C_F=\max\left(\sqrt{\cfrac{δ_b}{2\cdot d_b+\cfrac{6\cdot e}{m+0.5}}}, 1\right)

Ratio of the flange diameters

$$K=B/A$$
$K=B/A$
Equations in LaTeX code
K=B/A

Length parameter

$$l_0=\sqrt{B\cdot g_0}$$
$l_0=\sqrt{B\cdot g_0}$
Equations in LaTeX code
l_0=\sqrt{B\cdot g_0}

Factor $ β_T $

$$β_T=\cfrac{K^2\cdot\left(1+8.55246\cdot\log_{10}{\left(K\right)}\right)-1}{\left(1.0472+1.9448\cdot K^2\right)\cdot\left(K-1\right)}$$
$β_T=\cfrac{K^2\cdot\left(1+8.55246\cdot\log_{10}{\left(K\right)}\right)-1}{\left(1.0472+1.9448\cdot K^2\right)\cdot\left(K-1\right)}$
Equations in LaTeX code
β_T=\cfrac{K^2\cdot\left(1+8.55246\cdot\log_{10}{\left(K\right)}\right)-1}{\left(1.0472+1.9448\cdot K^2\right)\cdot\left(K-1\right)}

Factor $ β_U $

$$β_U=\cfrac{K^2\cdot\left(1+8.55246\cdot\log_{10}{\left(K\right)}\right)-1}{1.36136\cdot\left(K^2-1\right)\cdot\left(K-1\right)}$$
$β_U=\cfrac{K^2\cdot\left(1+8.55246\cdot\log_{10}{\left(K\right)}\right)-1}{1.36136\cdot\left(K^2-1\right)\cdot\left(K-1\right)}$
Equations in LaTeX code
β_U=\cfrac{K^2\cdot\left(1+8.55246\cdot\log_{10}{\left(K\right)}\right)-1}{1.36136\cdot\left(K^2-1\right)\cdot\left(K-1\right)}

Factor $ β_Y $

$$β_Y=\cfrac{1}{K-1}\cdot\left(0.66845+5.7169\cdot\cfrac{K^2\cdot\log_{10}{\left(K\right)}}{K^2-1}\right)$$
$β_Y=\cfrac{1}{K-1}\cdot\left(0.66845+5.7169\cdot\cfrac{K^2\cdot\log_{10}{\left(K\right)}}{K^2-1}\right)$
Equations in LaTeX code
β_Y=\cfrac{1}{K-1}\cdot\left(0.66845+5.7169\cdot\cfrac{K^2\cdot\log_{10}{\left(K\right)}}{K^2-1}\right)

Moment exerted on the flange per unit of length for assembly condition

$$M_{A}=M_{T-A}\cdot\cfrac{C_F}{A}$$
$M_{A}=M_{T-A}\cdot\cfrac{C_F}{A}$
Equations in LaTeX code
M_{A}=M_{T-A}\cdot\cfrac{C_F}{A}

Moment exerted on the flange per unit of length for operating condition

$$M_{op}=M_{T-op}\cdot\cfrac{C_F}{A}$$
$M_{op}=M_{T-op}\cdot\cfrac{C_F}{A}$
Equations in LaTeX code
M_{op}=M_{T-op}\cdot\cfrac{C_F}{A}

Moment exerted on the flange per unit of length for testing load cases

$$M_{test}=M_{T-test}\cdot\cfrac{C_F}{A}$$
$M_{test}=M_{T-test}\cdot\cfrac{C_F}{A}$
Equations in LaTeX code
M_{test}=M_{T-test}\cdot\cfrac{C_F}{A}

Factor $ A $

$$A=\cfrac{g_1}{g_0}-1$$
$A=\cfrac{g_1}{g_0}-1$
Equations in LaTeX code
A=\cfrac{g_1}{g_0}-1

Factor $ C $

$$C=48\cdot\left(1-ν^2\right)\cdot\left(\cfrac{h}{l_0}\right)^4$$
$C=48\cdot\left(1-ν^2\right)\cdot\left(\cfrac{h}{l_0}\right)^4$
Equations in LaTeX code
C=48\cdot\left(1-ν^2\right)\cdot\left(\cfrac{h}{l_0}\right)^4

Factor $ C_1 $

$$C_1=\cfrac{1}{3}+\cfrac{A}{12}$$
$C_1=\cfrac{1}{3}+\cfrac{A}{12}$
Equations in LaTeX code
C_1=\cfrac{1}{3}+\cfrac{A}{12}

Factor $ C_2 $

$$C_2=\cfrac{5}{42}+\cfrac{17\cdot A}{336}$$
$C_2=\cfrac{5}{42}+\cfrac{17\cdot A}{336}$
Equations in LaTeX code
C_2=\cfrac{5}{42}+\cfrac{17\cdot A}{336}

Factor $ C_3 $

$$C_3=\cfrac{1}{210}+\cfrac{A}{360}$$
$C_3=\cfrac{1}{210}+\cfrac{A}{360}$
Equations in LaTeX code
C_3=\cfrac{1}{210}+\cfrac{A}{360}

Factor $ C_4 $

$$C_4=\cfrac{11}{360}+\cfrac{59\cdot A}{5040}+\cfrac{1+3\cdot A}{C}$$
$C_4=\cfrac{11}{360}+\cfrac{59\cdot A}{5040}+\cfrac{1+3\cdot A}{C}$
Equations in LaTeX code
C_4=\cfrac{11}{360}+\cfrac{59\cdot A}{5040}+\cfrac{1+3\cdot A}{C}

Factor $ C_5 $

$$C_5=\cfrac{1}{90}+\cfrac{5\cdot A}{1008}-\cfrac{\left(1+A\right)^3}{C}$$
$C_5=\cfrac{1}{90}+\cfrac{5\cdot A}{1008}-\cfrac{\left(1+A\right)^3}{C}$
Equations in LaTeX code
C_5=\cfrac{1}{90}+\cfrac{5\cdot A}{1008}-\cfrac{\left(1+A\right)^3}{C}

Factor $ C_6 $

$$C_6=\cfrac{1}{120}+\cfrac{17\cdot A}{5040}+\cfrac{1}{C}$$
$C_6=\cfrac{1}{120}+\cfrac{17\cdot A}{5040}+\cfrac{1}{C}$
Equations in LaTeX code
C_6=\cfrac{1}{120}+\cfrac{17\cdot A}{5040}+\cfrac{1}{C}

Factor $ C_7 $

$$C_7=\cfrac{215}{2772}+\cfrac{51\cdot A}{1232}+\left(\cfrac{120+225\cdot A+150\cdot A^2+35\cdot A^3}{14}\right)\cdot\cfrac{1}{C}$$
$C_7=\cfrac{215}{2772}+\cfrac{51\cdot A}{1232}+\left(\cfrac{120+225\cdot A+150\cdot A^2+35\cdot A^3}{14}\right)\cdot\cfrac{1}{C}$
Equations in LaTeX code
C_7=\cfrac{215}{2772}+\cfrac{51\cdot A}{1232}+\left(\cfrac{120+225\cdot A+150\cdot A^2+35\cdot A^3}{14}\right)\cdot\cfrac{1}{C}

Factor $ C_8 $

$$C_8=\cfrac{31}{6930}+\cfrac{128\cdot A}{45045}+\left(\cfrac{66+165\cdot A+132\cdot A^2+35\cdot A^3}{77}\right)\cdot\cfrac{1}{C}$$
$C_8=\cfrac{31}{6930}+\cfrac{128\cdot A}{45045}+\left(\cfrac{66+165\cdot A+132\cdot A^2+35\cdot A^3}{77}\right)\cdot\cfrac{1}{C}$
Equations in LaTeX code
C_8=\cfrac{31}{6930}+\cfrac{128\cdot A}{45045}+\left(\cfrac{66+165\cdot A+132\cdot A^2+35\cdot A^3}{77}\right)\cdot\cfrac{1}{C}

Factor $ C_9 $

$$C_9=\cfrac{533}{30240}+\cfrac{653\cdot A}{73920}+\left(\cfrac{42+198\cdot A+117\cdot A^2+25\cdot A^3}{84}\right)\cdot\cfrac{1}{C}$$
$C_9=\cfrac{533}{30240}+\cfrac{653\cdot A}{73920}+\left(\cfrac{42+198\cdot A+117\cdot A^2+25\cdot A^3}{84}\right)\cdot\cfrac{1}{C}$
Equations in LaTeX code
C_9=\cfrac{533}{30240}+\cfrac{653\cdot A}{73920}+\left(\cfrac{42+198\cdot A+117\cdot A^2+25\cdot A^3}{84}\right)\cdot\cfrac{1}{C}

Factor $ C_{10} $

$$C_{10}=\cfrac{29}{3780}+\cfrac{3\cdot A}{704}-\left(\cfrac{42+198\cdot A+243\cdot A^2+91\cdot A^3}{84}\right)\cdot\cfrac{1}{C}$$
$C_{10}=\cfrac{29}{3780}+\cfrac{3\cdot A}{704}-\left(\cfrac{42+198\cdot A+243\cdot A^2+91\cdot A^3}{84}\right)\cdot\cfrac{1}{C}$
Equations in LaTeX code
C_{10}=\cfrac{29}{3780}+\cfrac{3\cdot A}{704}-\left(\cfrac{42+198\cdot A+243\cdot A^2+91\cdot A^3}{84}\right)\cdot\cfrac{1}{C}

Factor $ C_{11} $

$$C_{11}=\cfrac{31}{6048}+\cfrac{1763\cdot A}{665280}+\left(\cfrac{42+72\cdot A+45\cdot A^2+10\cdot A^3}{84}\right)\cdot\cfrac{1}{C}$$
$C_{11}=\cfrac{31}{6048}+\cfrac{1763\cdot A}{665280}+\left(\cfrac{42+72\cdot A+45\cdot A^2+10\cdot A^3}{84}\right)\cdot\cfrac{1}{C}$
Equations in LaTeX code
C_{11}=\cfrac{31}{6048}+\cfrac{1763\cdot A}{665280}+\left(\cfrac{42+72\cdot A+45\cdot A^2+10\cdot A^3}{84}\right)\cdot\cfrac{1}{C}

Factor $ C_{12} $

$$C_{12}=\cfrac{1}{2925}+\cfrac{71\cdot A}{300300}+\left(\cfrac{88+198\cdot A+156\cdot A^2+42\cdot A^3}{385}\right)\cdot\cfrac{1}{C}$$
$C_{12}=\cfrac{1}{2925}+\cfrac{71\cdot A}{300300}+\left(\cfrac{88+198\cdot A+156\cdot A^2+42\cdot A^3}{385}\right)\cdot\cfrac{1}{C}$
Equations in LaTeX code
C_{12}=\cfrac{1}{2925}+\cfrac{71\cdot A}{300300}+\left(\cfrac{88+198\cdot A+156\cdot A^2+42\cdot A^3}{385}\right)\cdot\cfrac{1}{C}

Factor $ C_{13} $

$$C_{13}=\cfrac{761}{831600}+\cfrac{937\cdot A}{1663200}+\left(\cfrac{2+12\cdot A+11\cdot A^2+3\cdot A^3}{70}\right)\cdot\cfrac{1}{C}$$
$C_{13}=\cfrac{761}{831600}+\cfrac{937\cdot A}{1663200}+\left(\cfrac{2+12\cdot A+11\cdot A^2+3\cdot A^3}{70}\right)\cdot\cfrac{1}{C}$
Equations in LaTeX code
C_{13}=\cfrac{761}{831600}+\cfrac{937\cdot A}{1663200}+\left(\cfrac{2+12\cdot A+11\cdot A^2+3\cdot A^3}{70}\right)\cdot\cfrac{1}{C}

Factor $ C_{14} $

$$C_{14}=\cfrac{197}{415800}+\cfrac{103\cdot A}{332640}-\left(\cfrac{2+12\cdot A+17\cdot A^2+7\cdot A^3}{70}\right)\cdot\cfrac{1}{C}$$
$C_{14}=\cfrac{197}{415800}+\cfrac{103\cdot A}{332640}-\left(\cfrac{2+12\cdot A+17\cdot A^2+7\cdot A^3}{70}\right)\cdot\cfrac{1}{C}$
Equations in LaTeX code
C_{14}=\cfrac{197}{415800}+\cfrac{103\cdot A}{332640}-\left(\cfrac{2+12\cdot A+17\cdot A^2+7\cdot A^3}{70}\right)\cdot\cfrac{1}{C}

Factor $ C_{15} $

$$C_{15}=\cfrac{233}{831600}+\cfrac{97\cdot A}{554400}+\left(\cfrac{6+18\cdot A+15\cdot A^2+4\cdot A^3}{210}\right)\cdot\cfrac{1}{C}$$
$C_{15}=\cfrac{233}{831600}+\cfrac{97\cdot A}{554400}+\left(\cfrac{6+18\cdot A+15\cdot A^2+4\cdot A^3}{210}\right)\cdot\cfrac{1}{C}$
Equations in LaTeX code
C_{15}=\cfrac{233}{831600}+\cfrac{97\cdot A}{554400}+\left(\cfrac{6+18\cdot A+15\cdot A^2+4\cdot A^3}{210}\right)\cdot\cfrac{1}{C}

Factor $ C_{16} $

$$C_{16}=C_1\cdot C_7\cdot C_{12}+C_2\cdot C_8\cdot C_3+C_3\cdot C_8\cdot C_2-\left(C_3^2\cdot C_7+C_8^2\cdot C_1+C_2^2\cdot C_{12}\right)$$
$C_{16}=C_1\cdot C_7\cdot C_{12}+C_2\cdot C_8\cdot C_3+C_3\cdot C_8\cdot C_2-\left(C_3^2\cdot C_7+C_8^2\cdot C_1+C_2^2\cdot C_{12}\right)$
Equations in LaTeX code
C_{16}=C_1\cdot C_7\cdot C_{12}+C_2\cdot C_8\cdot C_3+C_3\cdot C_8\cdot C_2-\left(C_3^2\cdot C_7+C_8^2\cdot C_1+C_2^2\cdot C_{12}\right)

Factor $ C_{17} $

$$C_{17}=\left[C_4\cdot C_7\cdot C_{12}+C_2\cdot C_8\cdot C_{13}+C_3\cdot C_8\cdot C_9-\left(C_{13}\cdot C_7\cdot C_3+C_8^2\cdot C_4+C_{12}\cdot C_2\cdot C_9\right)\right]\cdot\cfrac{1}{C_{16}}$$
$C_{17}=\left[C_4\cdot C_7\cdot C_{12}+C_2\cdot C_8\cdot C_{13}+C_3\cdot C_8\cdot C_9-\left(C_{13}\cdot C_7\cdot C_3+C_8^2\cdot C_4+C_{12}\cdot C_2\cdot C_9\right)\right]\cdot\cfrac{1}{C_{16}}$
Equations in LaTeX code
C_{17}=\left[C_4\cdot C_7\cdot C_{12}+C_2\cdot C_8\cdot C_{13}+C_3\cdot C_8\cdot C_9-\left(C_{13}\cdot C_7\cdot C_3+C_8^2\cdot C_4+C_{12}\cdot C_2\cdot C_9\right)\right]\cdot\cfrac{1}{C_{16}}

Factor $ C_{18} $

$$C_{18}=\left[C_5\cdot C_7\cdot C_{12}+C_2\cdot C_8\cdot C_{14}+C_3\cdot C_8\cdot C_{10}-\left(C_{14}\cdot C_7\cdot C_3+C_8^2\cdot C_5+C_{12}\cdot C_2\cdot C_{10}\right)\right]\cdot\cfrac{1}{C_{16}}$$
$C_{18}=\left[C_5\cdot C_7\cdot C_{12}+C_2\cdot C_8\cdot C_{14}+C_3\cdot C_8\cdot C_{10}-\left(C_{14}\cdot C_7\cdot C_3+C_8^2\cdot C_5+C_{12}\cdot C_2\cdot C_{10}\right)\right]\cdot\cfrac{1}{C_{16}}$
Equations in LaTeX code
C_{18}=\left[C_5\cdot C_7\cdot C_{12}+C_2\cdot C_8\cdot C_{14}+C_3\cdot C_8\cdot C_{10}-\left(C_{14}\cdot C_7\cdot C_3+C_8^2\cdot C_5+C_{12}\cdot C_2\cdot C_{10}\right)\right]\cdot\cfrac{1}{C_{16}}

Factor $ C_{19} $

$$C_{19}=\left[C_6\cdot C_7\cdot C_{12}+C_2\cdot C_8\cdot C_{15}+C_3\cdot C_8\cdot C_{11}-\left(C_{15}\cdot C_7\cdot C_3+C_8^2\cdot C_6+C_{12}\cdot C_2\cdot C_{11}\right)\right]\cdot\cfrac{1}{C_{16}}$$
$C_{19}=\left[C_6\cdot C_7\cdot C_{12}+C_2\cdot C_8\cdot C_{15}+C_3\cdot C_8\cdot C_{11}-\left(C_{15}\cdot C_7\cdot C_3+C_8^2\cdot C_6+C_{12}\cdot C_2\cdot C_{11}\right)\right]\cdot\cfrac{1}{C_{16}}$
Equations in LaTeX code
C_{19}=\left[C_6\cdot C_7\cdot C_{12}+C_2\cdot C_8\cdot C_{15}+C_3\cdot C_8\cdot C_{11}-\left(C_{15}\cdot C_7\cdot C_3+C_8^2\cdot C_6+C_{12}\cdot C_2\cdot C_{11}\right)\right]\cdot\cfrac{1}{C_{16}}

Factor $ C_{20} $

$$C_{20}=\left[C_1\cdot C_9\cdot C_{12}+C_4\cdot C_8\cdot C_3+C_3\cdot C_{13}\cdot C_2-\left(C_3^2\cdot C_9+C_{13}\cdot C_8\cdot C_1+C_{12}\cdot C_4\cdot C_2\right)\right]\cdot\cfrac{1}{C_{16}}$$
$C_{20}=\left[C_1\cdot C_9\cdot C_{12}+C_4\cdot C_8\cdot C_3+C_3\cdot C_{13}\cdot C_2-\left(C_3^2\cdot C_9+C_{13}\cdot C_8\cdot C_1+C_{12}\cdot C_4\cdot C_2\right)\right]\cdot\cfrac{1}{C_{16}}$
Equations in LaTeX code
C_{20}=\left[C_1\cdot C_9\cdot C_{12}+C_4\cdot C_8\cdot C_3+C_3\cdot C_{13}\cdot C_2-\left(C_3^2\cdot C_9+C_{13}\cdot C_8\cdot C_1+C_{12}\cdot C_4\cdot C_2\right)\right]\cdot\cfrac{1}{C_{16}}

Factor $ C_{21} $

$$C_{21}=\left[C_1\cdot C_{10}\cdot C_{12}+C_5\cdot C_8\cdot C_3+C_3\cdot C_{14}\cdot C_2-\left(C_3^2\cdot C_{10}+C_{14}\cdot C_8\cdot C_1+C_{12}\cdot C_5\cdot C_2\right)\right]\cdot\cfrac{1}{C_{16}}$$
$C_{21}=\left[C_1\cdot C_{10}\cdot C_{12}+C_5\cdot C_8\cdot C_3+C_3\cdot C_{14}\cdot C_2-\left(C_3^2\cdot C_{10}+C_{14}\cdot C_8\cdot C_1+C_{12}\cdot C_5\cdot C_2\right)\right]\cdot\cfrac{1}{C_{16}}$
Equations in LaTeX code
C_{21}=\left[C_1\cdot C_{10}\cdot C_{12}+C_5\cdot C_8\cdot C_3+C_3\cdot C_{14}\cdot C_2-\left(C_3^2\cdot C_{10}+C_{14}\cdot C_8\cdot C_1+C_{12}\cdot C_5\cdot C_2\right)\right]\cdot\cfrac{1}{C_{16}}

Factor $ C_{22} $

$$C_{22}=\left[C_1\cdot C_{11}\cdot C_{12}+C_6\cdot C_8\cdot C_3+C_3\cdot C_{15}\cdot C_2-\left(C_3^2\cdot C_{11}+C_{15}\cdot C_8\cdot C_1+C_{12}\cdot C_6\cdot C_2\right)\right]\cdot\cfrac{1}{C_{16}}$$
$C_{22}=\left[C_1\cdot C_{11}\cdot C_{12}+C_6\cdot C_8\cdot C_3+C_3\cdot C_{15}\cdot C_2-\left(C_3^2\cdot C_{11}+C_{15}\cdot C_8\cdot C_1+C_{12}\cdot C_6\cdot C_2\right)\right]\cdot\cfrac{1}{C_{16}}$
Equations in LaTeX code
C_{22}=\left[C_1\cdot C_{11}\cdot C_{12}+C_6\cdot C_8\cdot C_3+C_3\cdot C_{15}\cdot C_2-\left(C_3^2\cdot C_{11}+C_{15}\cdot C_8\cdot C_1+C_{12}\cdot C_6\cdot C_2\right)\right]\cdot\cfrac{1}{C_{16}}

Factor $ C_{23} $

$$C_{23}=\left[C_1\cdot C_7\cdot C_{13}+C_2\cdot C_9\cdot C_3+C_4\cdot C_8\cdot C_2-\left(C_3\cdot C_7\cdot C_4+C_8\cdot C_9\cdot C_1+C_2^2\cdot C_{13}\right)\right]\cdot\cfrac{1}{C_{16}}$$
$C_{23}=\left[C_1\cdot C_7\cdot C_{13}+C_2\cdot C_9\cdot C_3+C_4\cdot C_8\cdot C_2-\left(C_3\cdot C_7\cdot C_4+C_8\cdot C_9\cdot C_1+C_2^2\cdot C_{13}\right)\right]\cdot\cfrac{1}{C_{16}}$
Equations in LaTeX code
C_{23}=\left[C_1\cdot C_7\cdot C_{13}+C_2\cdot C_9\cdot C_3+C_4\cdot C_8\cdot C_2-\left(C_3\cdot C_7\cdot C_4+C_8\cdot C_9\cdot C_1+C_2^2\cdot C_{13}\right)\right]\cdot\cfrac{1}{C_{16}}

Factor $ C_{24} $

$$C_{24}=\left[C_1\cdot C_7\cdot C_{14}+C_2\cdot C_{10}\cdot C_3+C_5\cdot C_8\cdot C_2-\left(C_3\cdot C_7\cdot C_5+C_8\cdot C_{10}\cdot C_1+C_2^2\cdot C_{14}\right)\right]\cdot\cfrac{1}{C_{16}}$$
$C_{24}=\left[C_1\cdot C_7\cdot C_{14}+C_2\cdot C_{10}\cdot C_3+C_5\cdot C_8\cdot C_2-\left(C_3\cdot C_7\cdot C_5+C_8\cdot C_{10}\cdot C_1+C_2^2\cdot C_{14}\right)\right]\cdot\cfrac{1}{C_{16}}$
Equations in LaTeX code
C_{24}=\left[C_1\cdot C_7\cdot C_{14}+C_2\cdot C_{10}\cdot C_3+C_5\cdot C_8\cdot C_2-\left(C_3\cdot C_7\cdot C_5+C_8\cdot C_{10}\cdot C_1+C_2^2\cdot C_{14}\right)\right]\cdot\cfrac{1}{C_{16}}

Factor $ C_{25} $

$$C_{25}=\left[C_1\cdot C_7\cdot C_{15}+C_2\cdot C_{11}\cdot C_3+C_6\cdot C_8\cdot C_2-\left(C_3\cdot C_7\cdot C_6+C_8\cdot C_{11}\cdot C_1+C_2^2\cdot C_{15}\right)\right]\cdot\cfrac{1}{C_{16}}$$
$C_{25}=\left[C_1\cdot C_7\cdot C_{15}+C_2\cdot C_{11}\cdot C_3+C_6\cdot C_8\cdot C_2-\left(C_3\cdot C_7\cdot C_6+C_8\cdot C_{11}\cdot C_1+C_2^2\cdot C_{15}\right)\right]\cdot\cfrac{1}{C_{16}}$
Equations in LaTeX code
C_{25}=\left[C_1\cdot C_7\cdot C_{15}+C_2\cdot C_{11}\cdot C_3+C_6\cdot C_8\cdot C_2-\left(C_3\cdot C_7\cdot C_6+C_8\cdot C_{11}\cdot C_1+C_2^2\cdot C_{15}\right)\right]\cdot\cfrac{1}{C_{16}}

Factor $ C_{26} $

$$C_{26}=-\left(\cfrac{C}{4}\right)^{1/4}$$
$C_{26}=-\left(\cfrac{C}{4}\right)^{1/4}$
Equations in LaTeX code
C_{26}=-\left(\cfrac{C}{4}\right)^{1/4}

Factor $ C_{27} $

$$C_{27}=C_{20}-C_{17}-\cfrac{5}{12}+C_{17}\cdot C_{26}$$
$C_{27}=C_{20}-C_{17}-\cfrac{5}{12}+C_{17}\cdot C_{26}$
Equations in LaTeX code
C_{27}=C_{20}-C_{17}-\cfrac{5}{12}+C_{17}\cdot C_{26}

Factor $ C_{28} $

$$C_{28}=C_{22}-C_{19}-\cfrac{1}{12}+C_{19}\cdot C_{26}$$
$C_{28}=C_{22}-C_{19}-\cfrac{1}{12}+C_{19}\cdot C_{26}$
Equations in LaTeX code
C_{28}=C_{22}-C_{19}-\cfrac{1}{12}+C_{19}\cdot C_{26}

Factor $ C_{29} $

$$C_{29}=-\left(\cfrac{C}{4}\right)^{1/2}$$
$C_{29}=-\left(\cfrac{C}{4}\right)^{1/2}$
Equations in LaTeX code
C_{29}=-\left(\cfrac{C}{4}\right)^{1/2}

Factor $ C_{30} $

$$C_{30}=-\left(\cfrac{C}{4}\right)^{3/4}$$
$C_{30}=-\left(\cfrac{C}{4}\right)^{3/4}$
Equations in LaTeX code
C_{30}=-\left(\cfrac{C}{4}\right)^{3/4}

Factor $ C_{31} $

$$C_{31}=\cfrac{3\cdot A}{2}-C_{17}\cdot C_{30}$$
$C_{31}=\cfrac{3\cdot A}{2}-C_{17}\cdot C_{30}$
Equations in LaTeX code
C_{31}=\cfrac{3\cdot A}{2}-C_{17}\cdot C_{30}

Factor $ C_{32} $

$$C_{32}=\cfrac{1}{2}-C_{19}\cdot C_{30}$$
$C_{32}=\cfrac{1}{2}-C_{19}\cdot C_{30}$
Equations in LaTeX code
C_{32}=\cfrac{1}{2}-C_{19}\cdot C_{30}

Factor $ C_{33} $

$$C_{33}=\cfrac{C_{26}\cdot C_{32}}{2}+C_{28}\cdot C_{31}\cdot C_{29}-\left(\cfrac{C_{30}\cdot C_{28}}{2}+C_{32}\cdot C_{27}\cdot C_{29}\right)$$
$C_{33}=\cfrac{C_{26}\cdot C_{32}}{2}+C_{28}\cdot C_{31}\cdot C_{29}-\left(\cfrac{C_{30}\cdot C_{28}}{2}+C_{32}\cdot C_{27}\cdot C_{29}\right)$
Equations in LaTeX code
C_{33}=\cfrac{C_{26}\cdot C_{32}}{2}+C_{28}\cdot C_{31}\cdot C_{29}-\left(\cfrac{C_{30}\cdot C_{28}}{2}+C_{32}\cdot C_{27}\cdot C_{29}\right)

Factor $ C_{34} $

$$C_{34}=\cfrac{1}{12}+C_{18}-C_{21}-C_{18}\cdot C_{26}$$
$C_{34}=\cfrac{1}{12}+C_{18}-C_{21}-C_{18}\cdot C_{26}$
Equations in LaTeX code
C_{34}=\cfrac{1}{12}+C_{18}-C_{21}-C_{18}\cdot C_{26}

Factor $ C_{35} $

$$C_{35}=C_{18}\cdot C_{30}$$
$C_{35}=C_{18}\cdot C_{30}$
Equations in LaTeX code
C_{35}=C_{18}\cdot C_{30}

Factor $ C_{36} $

$$C_{36}=\left(C_{28}\cdot C_{35}\cdot C_{29}-C_{32}\cdot C_{34}\cdot C_{29}\right)\cdot\cfrac{1}{C_{33}}$$
$C_{36}=\left(C_{28}\cdot C_{35}\cdot C_{29}-C_{32}\cdot C_{34}\cdot C_{29}\right)\cdot\cfrac{1}{C_{33}}$
Equations in LaTeX code
C_{36}=\left(C_{28}\cdot C_{35}\cdot C_{29}-C_{32}\cdot C_{34}\cdot C_{29}\right)\cdot\cfrac{1}{C_{33}}

Factor $ C_{37} $

$$C_{37}=\left(\cfrac{C_{26}\cdot C_{35}}{2}+C_{34}\cdot C_{31}\cdot C_{29}-\cfrac{C_{30}\cdot C_{34}}{2}-C_{35}\cdot C_{27}\cdot C_{29}\right)\cdot\cfrac{1}{C_{33}}$$
$C_{37}=\left(\cfrac{C_{26}\cdot C_{35}}{2}+C_{34}\cdot C_{31}\cdot C_{29}-\cfrac{C_{30}\cdot C_{34}}{2}-C_{35}\cdot C_{27}\cdot C_{29}\right)\cdot\cfrac{1}{C_{33}}$
Equations in LaTeX code
C_{37}=\left(\cfrac{C_{26}\cdot C_{35}}{2}+C_{34}\cdot C_{31}\cdot C_{29}-\cfrac{C_{30}\cdot C_{34}}{2}-C_{35}\cdot C_{27}\cdot C_{29}\right)\cdot\cfrac{1}{C_{33}}

Factor $ E_1 $

$$E_1=C_{17}\cdot C_{36}+C_{18}+C_{19}\cdot C_{37}$$
$E_1=C_{17}\cdot C_{36}+C_{18}+C_{19}\cdot C_{37}$
Equations in LaTeX code
E_1=C_{17}\cdot C_{36}+C_{18}+C_{19}\cdot C_{37}

Factor $ E_2 $

$$E_2=C_{20}\cdot C_{36}+C_{21}+C_{22}\cdot C_{37}$$
$E_2=C_{20}\cdot C_{36}+C_{21}+C_{22}\cdot C_{37}$
Equations in LaTeX code
E_2=C_{20}\cdot C_{36}+C_{21}+C_{22}\cdot C_{37}

Factor $ E_3 $

$$E_3=C_{23}\cdot C_{36}+C_{24}+C_{25}\cdot C_{37}$$
$E_3=C_{23}\cdot C_{36}+C_{24}+C_{25}\cdot C_{37}$
Equations in LaTeX code
E_3=C_{23}\cdot C_{36}+C_{24}+C_{25}\cdot C_{37}

Factor $ E_4 $

$$E_4=\cfrac{3+C_{37}+3\cdot C_{36}}{12}-\cfrac{2\cdot E_3+15\cdot E_2+10\cdot E_1}{10}$$
$E_4=\cfrac{3+C_{37}+3\cdot C_{36}}{12}-\cfrac{2\cdot E_3+15\cdot E_2+10\cdot E_1}{10}$
Equations in LaTeX code
E_4=\cfrac{3+C_{37}+3\cdot C_{36}}{12}-\cfrac{2\cdot E_3+15\cdot E_2+10\cdot E_1}{10}

Factor $ E_5 $

$$E_5=E_1\cdot\left(\cfrac{3+A}{6}\right)+E_2\cdot\left(\cfrac{21+11\cdot A}{84}\right)+E_3\cdot\left(\cfrac{3+2\cdot A}{210}\right)$$
$E_5=E_1\cdot\left(\cfrac{3+A}{6}\right)+E_2\cdot\left(\cfrac{21+11\cdot A}{84}\right)+E_3\cdot\left(\cfrac{3+2\cdot A}{210}\right)$
Equations in LaTeX code
E_5=E_1\cdot\left(\cfrac{3+A}{6}\right)+E_2\cdot\left(\cfrac{21+11\cdot A}{84}\right)+E_3\cdot\left(\cfrac{3+2\cdot A}{210}\right)

Factor $ E_6 $

$$E_6=E_5-C_{36}\cdot\left(\cfrac{7}{120}+\cfrac{A}{36}+\cfrac{3\cdot A}{C}\right)-\cfrac{1}{40}-\cfrac{A}{72}-C_{37}\cdot\left(\cfrac{1}{60}+\cfrac{A}{120}+\cfrac{1}{C}\right)$$
$E_6=E_5-C_{36}\cdot\left(\cfrac{7}{120}+\cfrac{A}{36}+\cfrac{3\cdot A}{C}\right)-\cfrac{1}{40}-\cfrac{A}{72}-C_{37}\cdot\left(\cfrac{1}{60}+\cfrac{A}{120}+\cfrac{1}{C}\right)$
Equations in LaTeX code
E_6=E_5-C_{36}\cdot\left(\cfrac{7}{120}+\cfrac{A}{36}+\cfrac{3\cdot A}{C}\right)-\cfrac{1}{40}-\cfrac{A}{72}-C_{37}\cdot\left(\cfrac{1}{60}+\cfrac{A}{120}+\cfrac{1}{C}\right)

Factor $ β_F $

$$β_F=\cfrac{-E_6}{\left[\cfrac{C}{3\cdot\left(1-ν^2\right)}\right]^{1/4}\cdot\cfrac{\left(1+A\right)^3}{C}}$$
$β_F=\cfrac{-E_6}{\left[\cfrac{C}{3\cdot\left(1-ν^2\right)}\right]^{1/4}\cdot\cfrac{\left(1+A\right)^3}{C}}$
Equations in LaTeX code
β_F=\cfrac{-E_6}{\left[\cfrac{C}{3\cdot\left(1-ν^2\right)}\right]^{1/4}\cdot\cfrac{\left(1+A\right)^3}{C}}

Factor $ β_V $

$$β_V=\cfrac{E_4}{\left[\cfrac{3\cdot\left(1-ν^2\right)}{C}\right]^{1/4}\cdot\left(1+A\right)^3}$$
$β_V=\cfrac{E_4}{\left[\cfrac{3\cdot\left(1-ν^2\right)}{C}\right]^{1/4}\cdot\left(1+A\right)^3}$
Equations in LaTeX code
β_V=\cfrac{E_4}{\left[\cfrac{3\cdot\left(1-ν^2\right)}{C}\right]^{1/4}\cdot\left(1+A\right)^3}

Hub stress correction factor

$$φ=\cfrac{C_{36}}{1+A}$$
$φ=\cfrac{C_{36}}{1+A}$
Equations in LaTeX code
φ=\cfrac{C_{36}}{1+A}

Factor $ λ $

$$λ=\left(\cfrac{e\cdot β_F+l_0}{β_T\cdot l_0}+\cfrac{e^3\cdot β_V}{β_U\cdot l_0\cdot g_0^2}\right)$$
$λ=\left(\cfrac{e\cdot β_F+l_0}{β_T\cdot l_0}+\cfrac{e^3\cdot β_V}{β_U\cdot l_0\cdot g_0^2}\right)$
Equations in LaTeX code
λ=\left(\cfrac{e\cdot β_F+l_0}{β_T\cdot l_0}+\cfrac{e^3\cdot β_V}{β_U\cdot l_0\cdot g_0^2}\right)

Longitudinal stress in hub for assembly condition

$$σ_{H_{A}}=\cfrac{φ\cdot M_{A}}{λ\cdot g_1^2}$$
$σ_{H_{A}}=\cfrac{φ\cdot M_{A}}{λ\cdot g_1^2}$
Equations in LaTeX code
σ_{H_{A}}=\cfrac{φ\cdot M_{A}}{λ\cdot g_1^2}

Longitudinal stress in hub for operating condition

$$σ_{H_{op}}=\cfrac{φ\cdot M_{op}}{λ\cdot g_1^2}$$
$σ_{H_{op}}=\cfrac{φ\cdot M_{op}}{λ\cdot g_1^2}$
Equations in LaTeX code
σ_{H_{op}}=\cfrac{φ\cdot M_{op}}{λ\cdot g_1^2}

Longitudinal stress in hub for testing load cases

$$σ_{H_{test}}=\cfrac{φ\cdot M_{test}}{λ\cdot g_1^2}$$
$σ_{H_{test}}=\cfrac{φ\cdot M_{test}}{λ\cdot g_1^2}$
Equations in LaTeX code
σ_{H_{test}}=\cfrac{φ\cdot M_{test}}{λ\cdot g_1^2}

Radial stress in flange for assembly condition

$$σ_{r_{A}}=\cfrac{\left(1.333\cdot e\cdot β_F+l_0\right)\cdot M_{A}}{λ\cdot e^2\cdot l_0}$$
$σ_{r_{A}}=\cfrac{\left(1.333\cdot e\cdot β_F+l_0\right)\cdot M_{A}}{λ\cdot e^2\cdot l_0}$
Equations in LaTeX code
σ_{r_{A}}=\cfrac{\left(1.333\cdot e\cdot β_F+l_0\right)\cdot M_{A}}{λ\cdot e^2\cdot l_0}

Radial stress in flange for operating condition

$$σ_{r_{op}}=\cfrac{\left(1.333\cdot e\cdot β_F+l_0\right)\cdot M_{op}}{λ\cdot e^2\cdot l_0}$$
$σ_{r_{op}}=\cfrac{\left(1.333\cdot e\cdot β_F+l_0\right)\cdot M_{op}}{λ\cdot e^2\cdot l_0}$
Equations in LaTeX code
σ_{r_{op}}=\cfrac{\left(1.333\cdot e\cdot β_F+l_0\right)\cdot M_{op}}{λ\cdot e^2\cdot l_0}

Radial stress in flange for testing load cases

$$σ_{r_{test}}=\cfrac{\left(1.333\cdot e\cdot β_F+l_0\right)\cdot M_{test}}{λ\cdot e^2\cdot l_0}$$
$σ_{r_{test}}=\cfrac{\left(1.333\cdot e\cdot β_F+l_0\right)\cdot M_{test}}{λ\cdot e^2\cdot l_0}$
Equations in LaTeX code
σ_{r_{test}}=\cfrac{\left(1.333\cdot e\cdot β_F+l_0\right)\cdot M_{test}}{λ\cdot e^2\cdot l_0}

Tangential stress in flange for assembly condition

$$σ_{θ_{A}}=\cfrac{β_Y\cdot M_{A}}{e^2}-σ_{r_{A}}\cdot\cfrac{K^2+1}{K^2-1}$$
$σ_{θ_{A}}=\cfrac{β_Y\cdot M_{A}}{e^2}-σ_{r_{A}}\cdot\cfrac{K^2+1}{K^2-1}$
Equations in LaTeX code
σ_{θ_{A}}=\cfrac{β_Y\cdot M_{A}}{e^2}-σ_{r_{A}}\cdot\cfrac{K^2+1}{K^2-1}

Tangential stress in flange for operating condition

$$σ_{θ_{op}}=\cfrac{β_Y\cdot M_{op}}{e^2}-σ_{r_{op}}\cdot\cfrac{K^2+1}{K^2-1}$$
$σ_{θ_{op}}=\cfrac{β_Y\cdot M_{op}}{e^2}-σ_{r_{op}}\cdot\cfrac{K^2+1}{K^2-1}$
Equations in LaTeX code
σ_{θ_{op}}=\cfrac{β_Y\cdot M_{op}}{e^2}-σ_{r_{op}}\cdot\cfrac{K^2+1}{K^2-1}

Tangential stress in flange for testing load cases

$$σ_{θ_{test}}=\cfrac{β_Y\cdot M_{test}}{e^2}-σ_{r_{test}}\cdot\cfrac{K^2+1}{K^2-1}$$
$σ_{θ_{test}}=\cfrac{β_Y\cdot M_{test}}{e^2}-σ_{r_{test}}\cdot\cfrac{K^2+1}{K^2-1}$
Equations in LaTeX code
σ_{θ_{test}}=\cfrac{β_Y\cdot M_{test}}{e^2}-σ_{r_{test}}\cdot\cfrac{K^2+1}{K^2-1}

Stress factor

$\text{if }\ B\le 1000$
$\text{if }\ B\le 1000$
Equations in LaTeX code
\text{if }\ B\le 1000
$$k=1$$
$k=1$
Equations in LaTeX code
k=1
$\text{else if }\ B\geq 2000$
$\text{else if }\ B\geq 2000$
Equations in LaTeX code
\text{else if }\ B\geq 2000
$$k=1.333$$
$k=1.333$
Equations in LaTeX code
k=1.333
$\text{else}$
$\text{else}$
Equations in LaTeX code
\text{else}
$$k=\cfrac{2}{3}\cdot\left(1+\cfrac{B}{2000}\right)$$
$k=\cfrac{2}{3}\cdot\left(1+\cfrac{B}{2000}\right)$
Equations in LaTeX code
k=\cfrac{2}{3}\cdot\left(1+\cfrac{B}{2000}\right)

Requirements

$$ g_1\le h+g_0 $$
$g_1\le h+g_0$
Equations in LaTeX code
g_1\le h+g_0
$$ k\cdot σ_{H_{A}}\le 1.5\cdot f_d $$
$k\cdot σ_{H_{A}}\le 1.5\cdot f_d$
Equations in LaTeX code
k\cdot σ_{H_{A}}\le 1.5\cdot f_d
$$ k\cdot σ_{r_{A}}\le f_d $$
$k\cdot σ_{r_{A}}\le f_d$
Equations in LaTeX code
k\cdot σ_{r_{A}}\le f_d
$$ k\cdot σ_{θ_{A}}\le f_d $$
$k\cdot σ_{θ_{A}}\le f_d$
Equations in LaTeX code
k\cdot σ_{θ_{A}}\le f_d
$$ 0.5\cdot k\cdot\left(σ_{H_{A}}+σ_{r_{A}}\right)\le f_d $$
$0.5\cdot k\cdot\left(σ_{H_{A}}+σ_{r_{A}}\right)\le f_d$
Equations in LaTeX code
0.5\cdot k\cdot\left(σ_{H_{A}}+σ_{r_{A}}\right)\le f_d
$$ 0.5\cdot k\cdot\left(σ_{H_{A}}+σ_{θ_{A}}\right)\le f_d $$
$0.5\cdot k\cdot\left(σ_{H_{A}}+σ_{θ_{A}}\right)\le f_d$
Equations in LaTeX code
0.5\cdot k\cdot\left(σ_{H_{A}}+σ_{θ_{A}}\right)\le f_d
$$ k\cdot σ_{H_{op}}\le 1.5\cdot f_d $$
$k\cdot σ_{H_{op}}\le 1.5\cdot f_d$
Equations in LaTeX code
k\cdot σ_{H_{op}}\le 1.5\cdot f_d
$$ k\cdot σ_{r_{op}}\le f_d $$
$k\cdot σ_{r_{op}}\le f_d$
Equations in LaTeX code
k\cdot σ_{r_{op}}\le f_d
$$ k\cdot σ_{θ_{op}}\le f_d $$
$k\cdot σ_{θ_{op}}\le f_d$
Equations in LaTeX code
k\cdot σ_{θ_{op}}\le f_d
$$ 0.5\cdot k\cdot\left(σ_{H_{op}}+σ_{r_{op}}\right)\le f_d $$
$0.5\cdot k\cdot\left(σ_{H_{op}}+σ_{r_{op}}\right)\le f_d$
Equations in LaTeX code
0.5\cdot k\cdot\left(σ_{H_{op}}+σ_{r_{op}}\right)\le f_d
$$ 0.5\cdot k\cdot\left(σ_{H_{op}}+σ_{θ_{op}}\right)\le f_d $$
$0.5\cdot k\cdot\left(σ_{H_{op}}+σ_{θ_{op}}\right)\le f_d$
Equations in LaTeX code
0.5\cdot k\cdot\left(σ_{H_{op}}+σ_{θ_{op}}\right)\le f_d
$$ k\cdot σ_{H_{test}}\le 1.5\cdot f_{test} $$
$k\cdot σ_{H_{test}}\le 1.5\cdot f_{test}$
Equations in LaTeX code
k\cdot σ_{H_{test}}\le 1.5\cdot f_{test}
$$ k\cdot σ_{r_{test}}\le f_{test} $$
$k\cdot σ_{r_{test}}\le f_{test}$
Equations in LaTeX code
k\cdot σ_{r_{test}}\le f_{test}
$$ k\cdot σ_{θ_{test}}\le f_{test} $$
$k\cdot σ_{θ_{test}}\le f_{test}$
Equations in LaTeX code
k\cdot σ_{θ_{test}}\le f_{test}
$$ 0.5\cdot k\cdot\left(σ_{H_{test}}+σ_{r_{test}}\right)\le f_{test} $$
$0.5\cdot k\cdot\left(σ_{H_{test}}+σ_{r_{test}}\right)\le f_{test}$
Equations in LaTeX code
0.5\cdot k\cdot\left(σ_{H_{test}}+σ_{r_{test}}\right)\le f_{test}
$$ 0.5\cdot k\cdot\left(σ_{H_{test}}+σ_{θ_{test}}\right)\le f_{test} $$
$0.5\cdot k\cdot\left(σ_{H_{test}}+σ_{θ_{test}}\right)\le f_{test}$
Equations in LaTeX code
0.5\cdot k\cdot\left(σ_{H_{test}}+σ_{θ_{test}}\right)\le f_{test}
On this page